新救护车 Mercedes-Benz SPRINTER AMBULANCE

Mercedes Ambulance – The Mercedes Emergency Type Ambulances

The Mercedes Emergency Type Ambulances are completely harmonious with EN1789 ambulance standards. Technical and medical materials, used in the ambulance, are compatible with 10G (crash test) certificate. Seats, platforms of the stretcher, stretchers, and medical device tools, which will be assembled, is proper En1789 ambulance standards. Mercedes ambulance is manufactured as being proper for the ministry of health specification.

Mercedes emergency Ambulance is manufactured with the left side, the right side, and the ceiling with Abs covering.

Electric Installation
The whole electric installation which is used in designing and equipping the ambulance. Medical devices, ambulance connection mounting elements is manufactured as being appropriate with EN 1789+A2 standard.

Mercedes sprinter ambulances and the ambulance equipment are the most recently produced. They have never been used before compared with their segments.

The emergency ambulance works as a whole in harmony with the equipment and accessory that it contains.

The whole electric system, which is used in the ambulance, can be accessible from the patient’s and driver’s compartment. All the insurances, indicators, and the control boards are assembled as easily attainable for maintenance. External containers of ambulance’s top lamp, the electronic devices, the medical devices. The connections are not only being resistant to corrosion but also waterproof.

Mercedes Ambulance Installation Materials
The installation materials used in the ambulance are appropriate for ISO 1435 or ISO 6722-1 standard and equivalent international standards. Abs covering material which is used in the ambulance is fireproof.

Mercedes ambulance electric installation, electric equipment in transformation and the electric chukker which belongs to the accessories have a special installation. That has a different color from the chukkers in the ambulance electric system.

The materials are isolated with a thermoplastic covering. It is proper for the use of Mercedes ambulance and have the durability to a high amount of heat.

Electric cable connectors and sockets, external 220v electric system, Inverter and Redresor devices in the ambulance is manufactured as being appropriate to EN ISO 8092-1, EN ISO 8092-3, EN ISO 8092-4, and its installation are made to the ambulance.

There is a rectifier, which has 15 Ah capacity, and 220V input socket which is sheltered from water and powder in the left part in vehicle general which give to Mercedes ambulance vehicle to required battery charge while it doesn’t work or it is in the resting times.

Technical and Medical Equipment in Mercedes Ambulance
B TYPE

AMBULANCE CONTROL PANNEL - AC ARGE 1 PCS
RECTIFIER - ZER 20 A 1 PCS
INVERTER - ZER / ORBUS – 1000W PURE SINE WAVE INVERTER 1 SET
MAIN STRETCHER - ACK TAY 1 PCS
MAIN STRETCHER PLATFORM - AC ARGE 1 PCS
OXYGEN SYSTEM - HERSILL / MEGASAN 1 PCS
OXYGEN CYLINDER 10 LT - MES 2 PCS
MANUAL ASPIRATOR - DOLPHIN 1 PCS
DEFIBRILLATOR - MINDRAY D3 1 PCS
VOLUMETRIC INJECTION PUMP - MINDRAY / PROGETTI / OTHER
RESUSCITATION UNIT - UNICAMED 1 PCS
BASIC MEDICAL EQUIPMENT BAG - UNICAMED 1 PCS
EMERGENCY BORN SET - UNICAMED 1 SET
BURN SET - UNICAMED 1 SET
FUNERAL BAG - ACK AMBULANS 1 SET
MEDICAL CONSUMABLES - UNICAMED 1 SET
TRANSPORT VENTILATOR - AMBULANC AMOUL 6000S 1 PCS
COMBINATION STRECTHER - AC ARGE 1 PCS
HEAT ISOLATED CONTAINER - TAMKAN
FIXED SPHYGMOMANOMETER - SPENCER 1 PCS
PEDIATRIC AND ADULT TENSION DEVICE - ENDOSTALL 1 SET
TRACTION SPLINT SET - AC ARGE 1 SET
RESQUE VEST - AC ARGE 1 SET
SCOOP STRETCHER - ACK AMBULANCE 1 SET
LARYNGOSCOPE SET - OTHER 1 SET
DIAGNOSTIC SET
VACUUM STRETCHER - ATTUCHO/DRAGON/SPENCER 1 SET
CERVICAL SET - ATTUCHO/DRAGON/SPENCER 1 SET
VACUUM SPLINT - SET ATTUCHO/DRAGON/SPENCER 1 SET
AIR SPLINT SET - ATTUCHO/DRAGON/SPENCER 1 SET
HEAD IMMOBILIZATION - ATTUCHO/DRAGON/SPENCER 1 SET
SPINE BOARD PEDIATRIC - ATTUCHO/DRAGON/SPENCER 1 SET
SPINE BOARD ADULT - ATTUCHO/DRAGON/SPENCER 1 SET

There are headlamps that work with led on the back and front ceilings providing that looking from outside. These lamps can be controlled from the vehicle driver’s cabin; moreover, they have a feature of voiced warning. The back projector, which is based in the headlamp, is able to light the ambulance’s main stretcher as long as the ambulance’s door has been opened.

Mercedes Ambulance patient compartment is wide enough to enable transporting and making a medical intervention to two patients at the same time while the one is lying and the other one is sitting.

the ambulance’s external measures will have the original catalog features which are presented by the manufacturer. There won’t be any alteration on the external measures after coming out of the factory. There is no alteration on the vehicle’s side and polymids

-Mercedes Ambulance Cabin Lighting
There are 4 led lamps and 2 spot lamps whose control have been made from the vehicle driver’s cabin in order to light the cabin.

Cabin lighting is fulfilled with a control panel which is located in the vehicle cabinet.

-Ambulance Digital Electric Panel
The whole system in the vehicle is controlled with a panel located in the patient cabin, across the sliding door. This panel can be not only digital but also touching.

-Ambulance Heater
There is a heater working with a diesel motor or an aqueous system in the patient cabin in order to heat the exterior. There is a door that can be opened among the left and the right side on the right part of the Mercedes ambulance compartment in order to enable to bring up and down a patient. Also, there are grip bars on the back doors and left the side of the sliding door in order to facilitate to get into the ambulance.

The floor covering of the ambulance is formed as a single piece. It is skidproof. It can be easily cleaned and washed with water. It is antibacterial. It has a high resistant against combustion and structural chemicals.

-Outdoor Lighting of the Ambulance
There is outdoor lighting that works

simultaneously with 6 blue and red ambulance headlamp on the outside of the ambulance.

-Cupboard System of the Mercedes Ambulance
It is used PVC coating based on foamboard material in the Mercedes ambulance cabinets and the cabinet systems. Ambulance cupboard covers can be manufactured as orange, blue, or white. The materials used in the covers are antibacterial. It is used foamboard material which has a 17mm thickness in the cupboard covers. Foamboard material is manufactured as 1.1k/m3 intensity. The materials are compatible with 95/28/EC standards, which are non-flammability.

Ambulance coverings are manufactured as one piece. Materials used in the ambulance have ABS principles; in addition, they are antibacterial and fireproof. They can be easily washed. Covering material is manufactured as compatible with EN1789 norms.

-Air Conditioning of the Mercedes Ambulance
The ambulance has a split air conditioning in order to cool the patient cabinet. Fuel consumption is less than one liter in an hour. Its weight is less than 10 kilograms. Air conditioning of the ambulance is used in different capacities depending on the geographical regions.

-Stretcher Platform of the Mercedes Ambulance
In the middle of the ambulance patient cabinet, there is an ambulance stretcher platform, produced with stainless steel, located in order to facilitate movements of the stretcher. This platform is able to carry a patient whose weight is at least 250 kilograms. Also, it has 10g crash test certificate, which is compatible with 1789 standards.

-Mercedes Ambulance Main Stretcher
Ambulance stretcher, manufactured from stainless ethyl 61(AA 6351) material, is mounted on the ambulance platform. The ambulance stretcher is produced compatible with En1789 and En1865 norms. There are 4 stretcher wheels, which have a 15cm or 20cm diameter, on the ambulance stretcher. It is provided to make CPR application on the main stretcher.

-Mercedes Ambulance Defibrillator Device
It is mounted at the top of the main stretcher in the ambulance. It has features of EKG, SPO2. Moreover, it is at least 250 joules. A patient’s condition can be traced from a monitor.

-Mercedes Ambulance Ventilator Device
It is mounted beside the main stretcher in the ambulance. It works with the ambulance oxygen system. It has 2 hours average use time provided full battery. Also, it can be used with a portable oxygen tube out of the ambulance. The device works with a built-in battery. Battery’s lifetime is an average of 2 years.

-Mercedes Emergency Ambulance Medical Materials
The materials, which will be mentioned in the following sentence, located in the patient cabinet, are used for contributing to the emergency intervention.

>emergency birth set

>emergency burn set

>rescue vest

>ambulance chair stretcher

>oxygen system

>vacuum aspirator

>ambu set

-Mercedes Ambulance Patient Cabinet Seats
There are 2 staff seats, which are compatible with en1789 norms, in the patient compartment. Seats look through the cruising direction while the ambulance is in motion. Seats have a safety belt with 3 points. Also, they can lie to back at most 160 degrees.

The ambulance cabinet’s internal surfaces are rounded in order to prevent possible accidents while the ambulance in motion.

-Mercedes Ambulance Oxygen System
There are two oxygen tubes produced 2×10 aluminum in the ambulance. These tubes are located on the left side provided that looking to the vehicle from the left-back door.

There is a sequential system valve that allows the use of the oxygen system. Oxygen tubes are produced compatible with EN 7866 standards. There are two oxygen sockets in the ambulance cabinet in order to give an oxygen output. There are flowmeter, moisturizer, and oxygen suction jar on the sockets.